TURBOSMART LIMITED EDITION OPR T40 OIL PRESSURE REGULATOR 40PSI (SLEEPER)
Part # TS-0801-1003
Turbosmart’s Patent Pending OPR T40 is an Oil Pressure Regulator designed for your Turbocharger.
Many Turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern & hi-performance, engines and feeding these turbochargers the appropriate amount of oil pressure hase always been a challenge. Traditional methods to limit oil pressure have been with a restrictor, aimed at reducing pressure – However this also reduces flow.
Turbosmart’s OPR T40 is a true regulator in that target oil pressure oil 40psi can be achieved without compromising oil flow. This takes the guess work out of restrictor, or feed and drain hose selection and ensure the oil going to the turbocharger, never exceeds the manufacturers tolerances – This will provide you rock solid oil supply pressure, within the manufactures tolerances.
Tell Us How You Feel!
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0801-1003 |
Turbosmart Limited Edition OPR T40 Oil Pressure Regulator 40psi (Sleeper)
ADD TO CART
|
$125.95 |
ADD TO CART
|
TS-2 Performance Turbocharger (Water Cooled) 6466 V-Band 0.82AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter & Faster – The Turbosmart TS-2 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-2 series are water and oil cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
Tell Us How You Feel!
TS-2 Performance Turbocharger (Water Cooled) 6262 V-Band 0.82AR Internally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster—The Turbosmart TS-2 turbocharger series has been developed to leverage modern materials, design, and manufacturing techniques to create a Turbocharger range that meets the demands of motorsport and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation: weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-2 series is water and oil-cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and a main shaft combination that will provide the transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high-performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
Tell Us How You Feel!
STRAIGHT 304 STAINLESS STEEL MANDREL BEND TUBING ( CHOOSE YOUR SIZE )
(0 reviews) Share it View Details
304 Stainless Steel tubing. Our tubing is mandrel bent on computerized bending machines which provide a wrinkle free finish. Each pipe is then cleaned inside out and given a beautiful brush finish.
Size O.D - 1.50" Diameter
Grade: 304 Stainless Steel
Finish: Brushed
Length: Sections below on description
Tell Us How You Feel!
Kompact SmartPort Blow Off Valve Set suit Nissan Skyline GT-R
(0 reviews) Share it View Details
The Kompact Dual Port Blow Off Valve Set to suit the Nissan Skyline GT-R series, including R32, R33, and R34 (RB26DETT), has been designed to improve boost response and eliminate compressor surge, enhancing the efficiency and longevity of the GT-R’s factory turbochargers, while providing that high-performance blow-off valve sound that lets everyone know just what hides under the GT-R’s hood.
The Kompact Dual Port for the GT-R includes SmartPort technology ensuring your factory ECU & AFM (Air Flow Meter) are kept happy. The 50-50 venting to the atmosphere and recirculating balance will ensure quiet operation at low boost while maintaining the performance and sound of a vent-to-atmosphere off-valve under higher loads.
The Dual Port’s intelligent modular design also allows you to unscrew the cent-to-atmosphere trumpet, and replace it with the supplied blanking plug, to transform it into a complete recirculating valve for quieter, under-the-radar operation with all the same performance benefits. The Turbosmart Dual Port Range is proof you can have the best of both worlds!
Machined from precision billet aluminium with a black anodized finish, the Kompact Dual Port is both attractive and durable, with the strength to handle all the boost you could throw at it, with zero leaks.
Tell Us How You Feel!
Precision Gen2 PT7475 SPORTSMAN-COVER Turbocharger 1250 HP
(0 reviews) Share it View Details
.The PTE 7475 Gen 2 CEA Turbocharger boasts the following features:
- -Exclusive GEN 2 CEA® (Competition Engineered Aerodynamics) 74mm Compressor Wheel, machined from a 2618-aluminum forging
- -Air-Cooled, Dual Ceramic Ball-Bearing Center Housing Rotating Assembly (CHRA)
- -Sportsman Compressor Cover with a 5.0” Inlet and 4.2” Outlet
- -Improved efficiency and quicker transient response for optimal power and performance
- 75mm CEA® Turbine Wheel
-Let us help you unlock your vehicle’s full potential with a turbocharger built for success.
Tell Us How You Feel!
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product