TS-2 PERFORMANCE TURBOCHARGER (WATER COOLED) 6466 T4 DIVIDED 1.00AR EXTERNALLY WASTEGATED
Part # TS-2-6466B-D4100E
Smaller, Lighter and Faster – The Turbosmart TS-2 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-2 series is water and oil-cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and a central shaft combination that will provide the transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds, which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high-performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
Features
Unparalleled transient response
Aggressive aerodynamics with 7+7 splitter wheels
Lightweight 310s stainless steel investment cast turbine housings
Lightweight, Aluminium compressor covers
CFD-driven designed housings for optimal ARs and flow
T14 Inconel turbine wheel for extreme EGT’s
VSR speed balanced
Proprietary dual ceramic bearing system
Integrated Iron backplate on center housing
Specifications
Compressor Inlet: 4″ / 101.6mm
Compressor Inducer: 64mm
Turbine Inlet: T4 Divided Flange
Turbine Exducer: 66mm
Turbine AR: 0.1.00
Turbine Outlet: V-Band (3.00″)
Weight: 6.06kg / 13.3lbs
Horsepower Rating: 750-930HP
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-2-6466B-D4100E | TS-2 Turbocharger (Water Cooled) 6466 T4 Divided 1.00AR Externally Wastegated | $2331.89 |
Smart Port Dual Port Mitsubishi EVO IV to X - Black
(0 reviews) Share it View Details
A direct fit replacement for the factory unit, the Turbosmart Smart Port BOV suits Mitsubishi EVO IV up to X. It can handle anything from stock to heavily modified vehicles with upgraded turbochargers.
TS-2 Performance Turbocharger (Water Cooled) 6466 T3 1.10AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter & Faster – The Turbosmart TS-2 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-2 series are water and oil cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
Kompact Dual Port Blow Off Valve Suit Hyundai Veloster
(0 reviews) Share it View Details
Turbosmart’s Kompact VR02 BOV was explicitly designed to fit the Hyundai Veloster Turbo. The Veloster’s factory bypass valve is a plastic unit that becomes brittle and wears out over time. It can also be forced open at high boost levels – significantly if boost levels are increased over standard.
The Kompact VR02 features a unique design to fit in the tight mounting location of the Veloster’s factory bypass valve. The result is a product that is truly a direct replacement for the OEM valve, requiring no cutting or special tools for a 100% reversible installation. Machined from billet aluminium, the VR02 cannot be overcome by boost, and it won’t break like the standard plastic item.
The Dual Port provides a head-turning sound when the driver lets off the throttle while still routing air back into the intake, like the standard valve.
The Kompact VR02 Dual Port is modular in its design. It is easily adapted from the standard 50-50 setup to either a full recirculating or complete vent-to-atmosphere valve, based on the driver’s preference. Unscrew the unwanted fitting and replace it with the included blanking plug.
Kompact Supersonic Blow Off Valve Suit Honda Civic Si/RS 1.5L
(0 reviews) Share it View Details
A direct fit high-performance replacement for the factory plastic unit, the Turbosmart Kompact BOV suits the new generation Honda VTEC Turbo engines found in the Civic RS & Civic Si (1.5L). It is capable of handling high levels of boost and is made of billet aerospace-grade aluminium with high-temperature seals.
If you are looking for a BOV for your Civic Type R and Civic Type R (Fk2), please purchase TS-0203-1017.
Kompact Dual Port Blow Off Valve Suit Subaru & Nissan
(0 reviews) Share it View Details
The Kompact Dual Port blow-off valve directly replaces the stock bypass valve on the Subaru WRX MY08-14 and the new Nissan Juke/Pulsar Turbo. Standard valves crack with age and heat cycling and rely on rubber diaphragms that perish. They’re also not designed to handle increased boost levels. Turbosmart’s Kompact offers big blow-off valve performance in a small package. Its billet aluminium construction provides strength, while the precision-machined lightweight piston gives excellent valve response and sealing without relying on rubber diaphragms or O-rings. Hence, it’s far more durable and guards against compressor surge even when the boost is turned up.
The Kompact Dual Port features a 50-50 split operation between recirculating and vent-to-atmosphere. One recirc port keeps the car’s ECU happy, while one vent-to-atmosphere port gives the classic Turbosmart blow-off valve sound we know and love.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product