TS-1 TURBOCHARGER V-BAND CLAMP SUIT TURBINE 4.50"
Part # TS-19CLV-450
Turbine Housing V-Band Clamp as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for securing your turbine housing outlet, to your exhaust system.
Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.
Notes: This Clamp is the 4.50″ Clamp. It is recomended you measure and confirm this diameter is suitable before ordering
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-19CLV-450 | TS-1 Turbocharger V-Band Clamp Suit Turbine 4.50" | $59.39 |
TS-1 Turbocharger V-Band Clamp Suit Turbine 3.50"
(0 reviews) Share it View Details
Turbine Housing V-Band Clamp as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for securing the turbine housing inlet to your manifold and Turbine Housing outlet, to your exhaust system.
Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.
Notes: This Clamp is the 3.50″ Clamp. It is recomended you measure and confirm this diameter is suitable before ordering
Turbocharger V-Band Weld Flange Turbine Outlet 3.50"
(0 reviews) Share it View Details
Stainless Steel weld flange suit turbine housing V-Band outlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your exhaust system.
Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.
Notes: This is the 3.50″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering
Precision NEXT GEN PT6880 SPORTSMAN-COVER TURBOCHARGER 1225 HP
(0 reviews) Share it View Details
NEXT GEN 68mm CEA (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging. Air-cooled, Dual Ceramic Ball-Bearing Center Housing Rotating Assembly (CHRA) Sportsman compressor cover with a 5.0” inlet and 4.2” outlet 80mm CEA turbine wheel Air-cooled, dual ceramic ball bearing Turbine housing options: T4 divided inlet with .98 A/R, 1.12 A/R, or 1.28 A/R and 4 5/8” OD v-band discharge. Also available in a stainless steel v-band inlet/v-band outlet configuration for a $206.00 upcharge. Available A/R ratios are 1.00, 1.15, and 1.28 Rated to support 1,225 flywheel horsepower.
Precision NEXT GEN PT8085 SPORTSMAN-COVER TURBOCHARGER 1600 HP
(0 reviews) Share it View Details
All new sportsman frame sized 8085 turbocharger features a NEXT GEN, 80mm CEA compressor wheel mated to our 85mm high flow turbine wheel. This unit is based on the Sportsman ball bearing turbo and is available with multiple turbine housing options. Designed to take your build to the NEXT GENERATION, the NEXT GEN Sportsman 8085 is a record setting turbocharger and is a great option for those looking to make upwards of 1,600hp. NEXT GEN 80mm CEA (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging (80mm Inducer /112 Exducer) Air-cooled, Dual Ceramic Ball-Bearing Center Housing Rotating Assembly (CHRA) Sportsman compressor cover with a 5.0” inlet and 4.2” outlet 85mm CEA turbine wheel (85mm Exducer / 90mm Inducer) Air-cooled, dual ceramic ball bearing Turbine housing options: T4 divided inlet with .98 A/R, 1.12 A/R, or 1.28 A/R and 4 5/8” OD v-band discharge. Also available in a stainless steel v-band inlet/v-band outlet configuration for a $206.00 upcharge. Available A/R ratios are 1.00, 1.15, and 1.28 Rated to support 1,600 flywheel horsepower.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product