TS-1 PERFORMANCE TURBOCHARGER 6870 (KOMPACT) T4 DIVIDED 0.84AR EXTERNALLY WASTEGATED
Part # TS-1-6870B-D4084E
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
All Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
Features
Unparalleled transient response
Aggressive aerodynamics with 7+7 splitter wheels
Lightweight 310s stainless steel investment cast turbine housings
Lightweight, Aluminium compressor covers
CFD driven designed housings for optimal A/Rs and flow
T14 Inconel turbine wheel for extreme EGT’s
VSR speed balanced
Proprietary dual ceramic bearing system
Integrated Iron backplate on center housing
Specifications
Compressor Inlet: 4″ / 101.6mm
Compressor Inducer: 68mm
Turbine Inlet: T4 Divided
Turbine Exducer: 70mm
Turbine AR: 0.84
Turbine Outlet: V-Band (3.00″)
Weight: 6.86kg / 15.1lbs
Horsepower Rating: 850-990HP
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-1-6870B-D4084E | TS-1 Turbocharger 6870B (Kompact) D4 0.84AR Externally Wastegated | $2647.79 |
Kompact Plumb Back Valve (Diverter Valve) Suit 25mm Fittings
(0 reviews) Share it View Details
Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts who do not want to be noticed but want the performance and reliability benefits of a quality BOV.
Please note; that this will require two valves for twin-turbo applications, such as the Audi S4 2.7L (B5) 97-01
Precision Gen 1 PT5866 S-COVER TURBOCHARGER 650 HP
(0 reviews) Share it View Details
PTE's PT5866 Turbocharger features the following: HP Rating: 650hp Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging Higher efficiency and faster transient response for maximum power and performance 58mm inducer compressor wheel Compressor cover options: - "B" compressor cover 2.8" inlet/2.0" outlet - "E" compressor cover 3.0" inlet/2.0" outlet - "Ported S" compressor cover 4.0" inlet/2.5" outlet Exclusive CEA® (Competition Engineered Aerodynamics) 62mm, 76 trim turbine wheel Turbine housing options: - T3 .63 or .82 A/R with 3" OD (outer diameter) V-Band discharge - V-Band inlet .64 or .82 A/R with V-Band discharge - T4 Tangential .58 or .68 A/R with 3 5/8" OD (outer diameter) V-Band discharge - T4 Divided .84 A/R with 3 5/8" OD (outer diameter) V-Band discharge * NOTE: Additional cost may apply for certain housings. Available with either a Hydrodynamic 360 thrust bearing system, or an Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
TS-1 Performance Turbocharger 6466 T3 01.10AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter & Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
TS-1 Performance Turbocharger 7675 V-Band 0.96AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster – Turbosmart’s turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
All Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
Kompact Dual Port Blow Off Valve Suit Subaru WRX (2015-current)
(0 reviews) Share it View Details
Our latest Kompact SmartPort explicitly made for the 2015 WRX, features the innovative new Smart Port drive-by-wire friendly staging technology that gives you the response of a Plumb Back valve with the high-performance benefits of a vent-to-atmosphere valve. The SmartPort system involves a new manufacturing process, utilising specialised alloys and coatings and a revolutionary new vent-to-atmosphere trumpet design. These unique designs allow for a swift response while providing enhanced sealing. The result is quicker spool-up and better performance on modern drive-by-wire vehicles.
Kompact Dual Port Blow Off Valve Suit BMW N54
(0 reviews) Share it View Details
Kompact Range by Turbosmart is a high performance upgrade for the factory plastic diverter and bypass valves factory fitted to turbocharged cars, replacing the plastic and rubber system with a Motorsport-Proven billet alluminium valve which uses our boost-balance system for optimum performance and reliability, the the life of the vehicle.
The Kompact Range is a direct swap for your factory valve and benefits from immiediate performance and throttle response improvements, while offering unmatched reliabiltty over the life of standard, mildly tuned or heavily upgraded engines.
Turbosmart’s Boost-Balance system means the more boost you feed these valves, the better they seal – simple as that! The Billet Manufaacturing system ensures reliability and unmatched response is acheived by our 28mm postive-sealing piston based actuation.
The Kompact BMW Kit is a performance bolt-on replacement for the factory plastic bypass valves offering a more incredible boost response and no leaks including 2 valves and silicon hoses for remote mounting.
TS-1 Performance Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both Motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken a ‘whole of engine’ approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product