STAINLESS-STEEL POSITIVE LOCKING TIES - 8MM X 9" (8-PACK) & 8MM X 20" (4-PACK)
Part # 10216
Stainless-Steel Positive Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas.
Stainless-Steel Positive Locking Ties are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.
- Made from 316 Stainless Steel
- Tensile Strength: 5/16" 200 lbs., 1/2" 350 lbs.
- Capable of withstanding temperatures in excess of 2500°F
- Eight 9" ties, fitting up to 2" O.D.
- Four 20" ties, fitting up to 6" O.D.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| 10216 | Stainless Steel Locking Tie Kit - 9in & 20in | $36.58 |
TS-1 Performance Turbocharger 6466 T4 0.82AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter & Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
Kompact Plumb Back Valve (Diverter Valve) Suit 34mm Fittings
(0 reviews) Share it View Details
Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts who do not want to be noticed but want the performance and reliability benefits of a quality BOV.
Precision T4 V-BAND IN/OUT Turbine Housings
(0 reviews) Share it View Details
We offer a variety of turbine housing options with different wheels & A/Rs based on your application.
TS-1 Performance Turbocharger 5862 T4 0.82AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster – Turbosmart’s turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
All Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
TS-1 Turbocharger 6466 T4 Divided 1.00AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter, and Faster—The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design, and manufacturing techniques to create a Turbocharger range that meets the demands of motorsport and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil-cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and a main shaft combination that will provide the transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high-performance levels at lower shaft speeds. It is mated with a unique turbine wheel to provide power at high loads and maintain flow.
The TS-1 turbocharger series has taken an engine end-to-end approach, aiming to achieve power through reduced back pressure and high-performance turbines while being smaller, lighter, and faster in response than other solutions on the market.
Dual Port Smart Port Nissan GT-R R35 Kit
(0 reviews) Share it View Details
As turbocharged performance cars go, the Nissan GT-R is a legendary giant killer. The R35’s twin-turbo VR38 V6 offers exotic-beating performance levels in a much more accessible package. Turbosmart has developed a range of products specifically for the R35 GT-R, and our commitment to this legendary nameplate continues with our latest SmartPort blow-off valve.
The SmartPort is a revolutionary BOV design. The SmartPort’s drive-by-wire friendly staging technology works with the vehicle’s standard mapping to maximise the performance of the valve to deliver the best results for the car, giving you the response of a Plumb Back valve, with the high-performance benefits of a vent-to-atmosphere valve – a welcome improvement in a vehicle with such massive performance out of the box.
The SmartPort’s piston is made from aerospace alloy with a military-spec coating, reducing its weight and friction and improving valve response and durability. With faster response and better sealing, the SmartPort allows quicker spool-up and better performance on the drive-by-wire GT-R while reducing damaging compressor surge.
TS-1 Performance Turbocharger 6870 V-Band 0.96AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter & Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight Investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – While being smaller, lighter and faster in response than other solutions on the market.
TS-1 Performance Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both Motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken a ‘whole of engine’ approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product