SILICONE VACUUM HOSE 10 FT

GenV Electronic PowerGate60 External Wastegate

(0 reviews) Share it View Details

Turbosmart’s Patent Pending, eWG60 is a fully electronic actuated wastegate – Built on the successful, class-leading GenV PowerGate60 architecture, now with the kind of control never seen before. The eWG60 PowerGate60 is a 60mm Electronic External Wastegate that uses full electronic control without the limitations associated with traditional pneumatic control.

Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The GenV PowerGate60 already had class-leading flow capacity and heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can also be sure of unparalleled control. 

There are no springs, no hoses, no boost reference signal, nor any associated limitations. Gone are ‘Minimum’ boost levels associated with base spring pressure or heat-related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or tuning interface. The eGate range requires a Dual Half-Bridge input for control, much like how an electronic throttle body is controlled and the strategy is as good as your imagination and your ECU or controller will allow. 

GenV ProGate50 14psi External Wastegate (Sleeper)

(0 reviews) Share it View Details

The GenV WG50 ProGate50 External Wastegate is a Motorsport-proven, cost-effective 50mm external wastegate – The Highest Flowing 50mm External Wastegate in the World! The GenV provides extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity.

The GenV External Wastegate from Turbosmart was a ground-up rework of a classic, and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV Range has more features, options and performance than any other gate.

A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360-degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Vee Port PRO Subaru-Black

(0 reviews) Share it View Details

Redesigned from the ground up, the new Vee Port Pro suit Subaru is 20% smaller and 33% lighter than its predecessor. Features a unique, variable exhaust port system, providing superior venting of excess pressure. Easy to install and set up. An ideal choice for street-tuned WRXs.

MVR / MVS Wastegate Port Plug

(0 reviews) Share it View Details

Genuine TiAL Sport replacement wastegate port plug for the MVR and MVS. Sold individually as needed. Price is for one plug.

Stainless-Steel Locking Ties - 8" 9-Pack

(0 reviews) Share it View Details

Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas.

Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.

• Constructed from high grade 316 stainless steel
• Capable of withstanding in excess of 2500°F
• 100lbs tensile strength
• Fits up to 2” O.D.

Treadstone Authorized Dealer Banner

(0 reviews) Share it View Details

Inform your customers that you are an authorized Treadstone dealer!

Floor & Tunnel Shield II™ - 12" x 21"

(0 reviews) Share it View Details

Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics.

Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core, Floor & Tunnel Shield II withstands up to 1750°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat.

Titanium™ Turbo Shield/Blanket - T6 Shield

(0 reviews) Share it View Details

Fire Wrap 3000™ - 1.5" ID x 24"

(0 reviews) Share it View Details

Fire Wrap 3000™ thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve™ but with the convenience of a hook & loop edge closure design.  Fire Wrap 3000™ provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting.