KOMPACT PLUMB BACK VALVE (DIVERTER VALVE) SHORTIE
Part # TS-0203-1261
Kompact Valve from Turbsomart was developed to take the Motorsport-Proven 28mm, Postiive Sealing Piston Valve Technology and adapt it to the smaller footprint of the compressor cover mounted bypass valves as found on common Borgwarner EFR and KKK Turbochargers as well as many Ford Ecoboost Engines.
The Kompact Valve is a bolt-on, direct repalcement for the factory and OE plastic diverter valves that use un-enforced diahgrams and are known to crack under increased boost and develop age, heat and cycle related boost leaks ovet time.
The Kompact Valve provides increased boost response and higher boost handling with the long term durability of a billet alluminium body and positive sealing piston along with our boost-balance technology which means the more boost you feed these valves, the better they seal – It literally is that simple.
Features
Boost-Balance Technology
28mm Positive Seal Piston
Over 600HP Flow Potential
Suitable for Standard and Modified Engines
Billet Construction with High-Temperature O-rings
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0203-1261 | BPV Kompact re-circ (shortie) Ford Focus ST/Borg Warner/Volvo/Porsche997/KKK/EFR V2 | $206.09 |
Cool Tube Extreme™ - 0.75" x 36" Silver
(0 reviews) Share it View Details
Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
Onyx™ Series Wastegate Heat Shield
(0 reviews) Share it View Details
A TITANIUM LR outer layer in a proprietary diagonal weave with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available with a precise fit. DEI Wastegate/Blow Off valve covers help reduce under hood temperatures and reduce the chance of burns when working under the hood. Includes stainless wire for an easy install.
Dual Port Nissan-Black
(0 reviews) Share it View Details
Easy to install and set up, the Turbosmart Dual Port BOV, to suit Nissan, features sequential ports for quiet operation on mild boost and full performance at full boost.
Precision PTE 66MM CO2 WG PISTON/DIAPHRAGM ASSEMBLY
(0 reviews) Share it View Details
PTE 66MM CO2 WG PISTON/DIAPHRAGM ASSEMBLY
Kompact EM BOV 25mm Dual Port
(0 reviews) Share it View Details
The award-winning Kompact EM series Blow Off Valves are the world’s first plug-and-play Blow-Off Valves. Unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. No adaptors, hoses or extra assembly are required. All this while retaining complete OE control of the BOV’s operation.
Thanks to our world-leading engineering and simulation abilities, Turbocharger performance is increased due to minimising leakage, rapid response, and superior thermal performance.
A must-have for hybrid or larger flowing turbos that utilise an OE electronic diverter valve by not leaking, the EM will achieve a target boost without stressing the turbocharger and wastegate.
The Universal Kompact EM allows for remote mounting of a higher flowing BOV than the shortie but enables the option to utilise the OE diverter valve function for complete OE integration, allowing for larger turbo kits and not compromising diverter valve functionality or performance while still maintaining the added benefits of upgrading to a leak-proof, high boost handling diverter valve.
Dual Port vents both to the atmosphere and back into the air intake.
Fire Sleeve™ & Tape Kit - 0.625" ID x 36"
(0 reviews) Share it View Details
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution.
Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.
Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.
Onyx™ Series Turbo Shield/Blanket - GT22 Kit
(0 reviews) Share it View Details
- Strong riveted anchors to secure shield
- Black carbon fiber look
- Ultimate thermal barrier reduces turbo lag
- Double reinforced seams inside & outside
- Available as Shield only or in a kit
Precision PTE GEN2 56MM CO2 WASTEGATE (PISTON STYLE)
(0 reviews) Share it View Details
Precision Turbo and Engine's high-quality yet economical 56MM Wastegate CO2 Dual Port Top. The external wastegate was designed specifically for use with CO2-based boost control systems. The wastegate offers quicker response time, accuracy, and durability under the high pressure demands of CO2 actuation, when compared to standard wastegate designs.
Reflect-A-GOLD™ Heat Reflective Sheet - 24" x 24"
(0 reviews) Share it View Details
Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes.
Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat.
Blow Off Valve Controller Kit – GenV RacePort BOV (Black)
(0 reviews) Share it View Details
The RacePort BOV Controller Kit is everything you need to get your diesel or low / no vacuum performance engine making all the right noises! This Universal kits includes the Turbosmart BOV Controller, and a RacePort 50mm VTA (Vent to Atmosphere) Blow Off Valve.
The Turbosmart BOV Controller Kit is a kit comprising a controller, solenoid & all cables and hoses required for isntallation. The BOV Controller itself is an electrical device that takes input from your throttle pedal & uses this to energise a solenoid and vent your chosen valve. The Controller is adjustable for sensitivity and activation duration allowing you to customise it to your needs. The BOV Controller is designed to provide engines such as diesel and other ‘low/no’ vacuum signal engines where a dump or Diverter Valves is required.
The Turbosmart RacePort is famous for being an amazingly small and light BOV for torced induction competition-level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM – making it the highest flowing BOV of its type on the market.
Turbosmart’s Boost-Balance System means the more boost you feed this valve, the better it closes and seals – It is literally as simple as that. Billet Alluminium construction with a diaphragm operated valve for the fastest possisble response with V-Band fitment and a range of springs to suit your needs.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product