KOMPACT PLUMB BACK VALVE (DIVERTER VALVE) KIT SUIT BMW N54
Part # TS-0203-1250
Kompact Range by Turbosmart is a high performance upgrade for the factory plastic diverter and bypass valves factory fitted to turbocharged cars, replacing the plastic and rubber system with a Motorsport-Proven billet alluminium valve which uses our boost-balance system for optimum performance and reliability, the the life of the vehicle.
The Kompact Range is a direct swap for your factory valve and benefits from immiediate performance and throttle response improvements, while offering unmatched reliabiltty over the life of standard, mildly tuned or heavily upgraded engines.
Turbosmart’s Boost-Balance system means the more boost you feed these valves, the better they seal – simple as that! The Billet Manufaacturing system ensures reliability and unmatched response is acheived by our 28mm postive-sealing piston based actuation.
The Kompact BMW Kit is a performance bolt-on replacement for the factory plastic bypass valves offering a more incredible boost response and no leaks including 2 valves and silicon hoses for remote mounting.
Features
Boost-Balance Valve Technology
28mm High Flowing Positive Sealing Piston
Direct Swap for OEM Units
Billet construction with high-temperature o-rings
Fitment Available in Plumback or Dual Port options
Suitable for the N54 Twin Turbo BMW 135, 335 and Z4 (required addiitonal pipe kit TS-0203-2001).
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0203-1250 | BOV Kompact VR03 Plumb Back KIT - BMW | $485.99 |
Reflect-A-GOLD™ Heat Reflective Tape - 1.5" x 30'
(0 reviews) Share it View Details
Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes.
Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat.
Cool Tube Extreme™ - 1.25" x 36" Black
(0 reviews) Share it View Details
Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
GenV UltraGate38HP ‘High Pressure’ 35psi External Wastegate (Black)
(0 reviews) Share it View Details
The GenV UltraGate38 HP external wastegate is a Motorsport proven, cost effective 38mm 2 Bolt external wastegate with base spring pressure options of up to 50psi! Add to that some reference signal manipulation and you have some serious boost! The GenV provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.
The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it.
A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360 degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision and 1/8″ NPT reference ports.
GenV RacePort BOV (Blue) with Female Flange
(0 reviews) Share it View Details
The RacePort Series Blow Off Valve is famous for being an amazingly small and light BOV for supercharged competition-level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM – making it the highest flowing BOV of its type on the market.
These ‘Female Flange’ Variants are designed to fit peer/competitor flange systems for ease of changeover & do not include a weld on the mounting flange. For a complete kit including a mounting system, refer to our full range of RacePort Valves.
Available In
Black: TS-0204-1142
Blue: TS-0204-1141
Red: TS-0204-1144
Purple: TS-0204-1143
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product