IWG75 WASTEGATE ACTUATOR SUIT MITSUBISHI EVO 9 BLACK 26PSI
Part # TS-0601-2262
Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment resulting in improved boost response throughout the RPM range.
This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm & revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.
Upgrading with the same base pressure as the factory, you can expect a broader boost & torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures. However, tuning & recalibration are likely required.
Features
Proprietary Silicon Nomex Diaphragm
Choice of Springs from 3psi to 26psi (Optional)
High-Grade Billet Aluminum Construction
Stainless Steel Rods and Clevis
Turbosmart Unique Locking Collar System
Notes
14 psi Version is a direct replacement for the factory item. All other versions will require tuning/calibration of your engine’s ECU.
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0601-2262 | IWG75 Mitsubishi EVO 9 26 PSI Black | $229.49 |
WG38/40/45 1/16NPT Hose Barb Fittings
(0 reviews) Share it View Details
Turbosmart’s WG38/40/45 1/16NPT Hose Barb Fittings are the perfect spare parts for Turbosmart UltraGate38 (38mm), CompGate40 (40mm) and HyperGate45 (45mm) External Wastegates, including HP Gates. These fittings allow you to use a 6mm ID hose when connecting to reference/vacuum ports, making them incredibly convenient and reliable. Turbosmart is dedicated to providing top-quality performance products, so you can trust that these fittings will serve your vehicle with maximum efficiency. Get Turbosmart’s WG38/40/45 1/16NPT Hose Barb Fittings today for spare parts that will last!
1/8" NPT to -4AN male – Stainless Steel
(0 reviews) Share it View Details
Turbosmart’s 1/8″ NPT to -4AN male – Stainless Steel is a high-quality component designed for plumbing External Wastegates. Constructed from durable stainless steel and fitted with Turbosmart’s superior sealing technology, the product ensures optimal performance of your External Wastegate. Turbosmart also offers a variety of additional accessories, such as gaskets and mounting hardware, to ensure proper fitment and longevity of External Wastegates. Get Turbosmart’s 1/8″ NPT to -4AN male – Stainless Steel today and enjoy the peace of mind from quality Turbosmart components.
IWG75 Wastegate Actuator Suit Subaru WRX MY15 7PSI
(0 reviews) Share it View Details
Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment resulting in improved boost response throughout the RPM range.
This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.
Upgrading with the same base pressure as the factory, you can expect a broader boost and torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures. However, tuning and recalibration are likely required.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product