IWG75 UNIVERSAL WASTEGATE ACTUATOR (UNF) 150MM 7PSI
Part # TS-0681-5072
This improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.
Upgrading with the same base pressure as factory, you can expect a broader boost and torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning and recalibration is likely required.
Features
Proprietary Silicon Nomex Diaphragm
Choice of Springs from 3psi to 26psi (Optional)
High Grade Billet Aluminum Construction
Stainless Steel Rods and Clevis
Turbosmart Unique Locking Collar System
This is a Universal Single Port IWG75 Actuator supplied with a 150mm long, 1/4″ UNF threaded rod for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0681-5072 | IWG75 Universal 150mm rod 7 PSI Black | $190.79 |
IWG75 Universal Wastegate Actuator (M6) 140mm 10PSI
(0 reviews) Share it View Details
Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment, resulting in improved boost response throughout the RPM range.
This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.
Upgrading with the same base pressure as the factory, you can expect a broader boost and torque curve through peak boost achieved earlier in the RPM and hold longer into higher RPM. These improvements can be amplified with higher base pressures; however, tuning and recalibration are likely required.
Titanium V-band outlet weld flange suit WG50 ProGate50
(0 reviews) Share it View Details
Turbosmart Titanium V-band weld flanges are made from the highest-grade materials to ensure the best possible performance and fitment. Titanium is known for its high strength, corrosion resistance, low weight and thermal stability at elevated temperatures and is available to provide lightweight, motorsport quality and show car fitment for your favourite Turbosmart hardware.
Manufactured from Grade 2 Titanium, Turbosmart titanium flanges are easy to work with and provide strong weldability properties and are an exact fit to Turbosmart products being genuine accessories.
Available in
Inlet V-Band flanges suit Raceport, Big Bubba, ProPort and PowerPort blow off and bypass valves.
Inlet & outlet V-Band flanges suit 40, 45, 50 and 60mm external wastegates, inc.
Gen4 WG50/60 7PSI IN SPRG-BLK/WHT
(0 reviews) Share it View Details
Turbosmart’s Gen4 WG50/60 7PSI Inner Spring Black/White is a must-have for external wastegate setups. This spring provides the ideal boost pressure for any turbocharger, ensuring consistent and reliable performance even under extreme conditions. Turbosmart’s design ensures that this spring will last for years, providing maximum performance with minimal maintenance. With Turbosmart’s Gen4 WG50/60 7PSI Inner Spring Black/White, you can trust that your engine will perform as expected every time you hit the gas pedal. Ensure your setup is up to spec with Turbosmart’s best-in-class external wastegate spring.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product