IWG75 UNIVERSAL WASTEGATE ACTUATOR (UNF) 150MM 10PSI
Part # TS-0681-5102
This improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.
Upgrading with the same base pressure as factory, you can expect a broader boost and torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning and recalibration is likely required.
Features
Proprietary Silicon Nomex Diaphragm
Choice of Springs from 3psi to 26psi (Optional)
High Grade Billet Aluminum Construction
Stainless Steel Rods and Clevis
Turbosmart Unique Locking Collar System
This is a Universal Single Port IWG75 Actuator supplied with a 150mm long, 1/4″ UNF threaded rod for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0681-5102 | IWG75 Universal 150mm rod 10 PSI Black | $190.79 |
GenV WG60 Outlet and StraightGate50 V-Band
(0 reviews) Share it View Details
Stainless Steel ‘Strap-Type’ V-Band assembly to suit Turbosmart GenV WG60 PowerGate60 and SG50 StraightGate50 External Wastegates.
Designed as part of the V-Band Assembly of the GenV External Wastegate range, these V-Bands feature Stainless Steel Construction, fine thread bolt & nut.
Suits
GenV WG60 PowerGate60 Outlet
pSG50 StraightGate50 inlet & Outlet
Notes
Does Not Suit GenV PowerGate60 Inlet
Does Not Suit Gen4 External Wastegates
Gen4 IWG WG38/40/45/50L 10PSI OUTER SPRING – BROWN/BLUE
(0 reviews) Share it View Details
Spring – Suit Turbosmart Ultra-Gate38 (38mm), Comp-Gate40 (40mm), Hyper-Gate45 (45mm) External Wastegates, and Internal Wastegate Actuators (IWG-75).
Turbosmart’s springs are designed to work with our Plumb Back, Dual Port and Supersonic blow off valves. They offer a wide range of spring rates to suit your driving style and application. Turbosmart’s springs are made from high-quality materials and are designed to maintain the peak performance of your blow off valve under the most extreme conditions. Choose from our selection of Turbosmart springs to get the perfect fit for your car and the best performance from your blow off valve.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product