GENV RACEPORT BOV – (SLEEPER)
Part # TS-0204-1135

Blow Off Valve Controller Kit – Bubba Sonic (Black)

(0 reviews) Share it View Details

The Bubba Sonic BOV Controller Kit is everything you need to get your diesel or low / no vacuum performance engine making all the right noises! This Universal kits includes the Turbosmart BOV Controller, and a Big Bubba VTA (Vent to Atmosphere) Blow Off Valve.

The Turbosmart BOV Controller Kit is  kit comprising a controller, solenoid & all cables and hoses required for isntallation. The BOV Controller itself is an electrical device that takes input from your throttle pedal & uses this to energise a solenoid and vent your chosen valve. The Controller is adjustable for sensitivity and activation duration allowing you to customise it to your needs. The BOV Controller is designed to provide engines such as diesel and other ‘low/no’ vacuum signal engines where a dump or Diverter Valves is required.

Big Bubba From Turbosmart exists because sometomes Bigger is Better! Big Bubba is a piston style valve for large capacity supercharged and turbocharged engines including diesels! If you’re looking for an inconspicous valve for a small capacity, low loost daily driver, you will need to look elsewhere!

Turbosmart’s Boost-Balance System means the more boost you feed this valve, the better it closes and seals – It is literally as simple as that. The 2 inch piston design is an expansion of our traditional BOV5 design, simply expanded to provide big flow and fitment options.

PlumbBack Uni 38mm-Blue

(0 reviews) Share it View Details

Fully recirculating valve. A quiet alternative to the atmospheric BOV, the PlumbBack system vents all excess pressure back into the intake system. 

Precision PTE 66MM CAN CLAMP KIT

(0 reviews) Share it View Details

PTE 66MM CAN CLAMP KIT

GenV Electronic CompGate40 Electronic External Wastegate

(0 reviews) Share it View Details

Turbosmart’s Patent Pending, eWG40 is a fully electronic actuated wastegate – Built on the successful, class-leading GenV CompGate40 architecture, now with the kind of control never seen before. The eWG40 CompGate40 is a 40mm Electronic External Wastegate that uses full electronic control without the limitations associated with traditional pneumatic control.

Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The GenV CompGate40 already had class-leading flow capacity and heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can also be sure of unparalleled control.

There are no springs, no hoses, no boost reference signal, nor any associated limitations. Gone are ‘Minimum’ boost levels associated with base spring pressure or heat-related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or tuning interface. The eGate range requires a Dual Half-Bridge input for control, much like how an electronic throttle body is controlled and the strategy is as good as your imagination and your ECU or controller will allow. 

MVS Wastegate Diaphragm

(0 reviews) Share it View Details

Genuine TiAL Sport replacement diaphragm for the MV-S 38mm Wastegates. Fits vband only.

Heat Screen™ - 36" x 20"

(0 reviews) Share it View Details

Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components.

Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape™ is ideal for sealing and covering seams.

Heat Screen™ - 12" x 24"

(0 reviews) Share it View Details

Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components.

Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape™ is ideal for sealing and covering seams.