GENV ELECTRONIC HYPERGATE45 EXTERNAL WASTEGATE
Part # TS-0553-1502
Turbosmart’s Patent Pending, eWG45 is a fully electronic actuated 45mm wastegate – Built on the successful, class-leading GenV HyperGate45 architecture, now with the kind of control never seen before. The eWG45 HyperGate45 is a 45mm Electronic External Wastegate that uses full electronic control without the limitations associated with traditional pneumatic control.
Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The GenV Hypergate45 already had class-leading flow capacity and heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can also be sure of unparalleled control.
There are no springs, hoses, boost reference signals or associated limitations. Gone are ‘Minimum’ boost levels associated with base spring pressure or heat-related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero to ‘All of it’ – All from your laptop or tuning interface. The eGate range requires a Dual Half-Bridge input for control, much like how an electronic throttle body is controlled and the strategy is as good as your imagination and your ECU or controller will allow.
Features
Class Leading, CFD & Bench Validated Flow Performance
Nitronic 60 Valve Guide & High Temp 347 SS Body
Liquid Cooled, Electronic Actuator
Strap Type V-band clamps
User Adjustable Actuator Position
Onboard Analog 0-5V Wastegate Position Sensor
Onboard Analog 0-5V Actuator Temperature Sensor
Onboard Digital (PWM) Wastegate Position Sensor
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0553-1502 | E-WG45 GenV Hyper-Gate 45mm Electronic Wastegate - Black | $1024.19 |
Plumb Back Subaru -Black
(0 reviews) Share it View Details
Quiet and completely street-legal! A full recirculating BOV, ideal for WRX & STI enthusiasts who don’t want to be noticed. Easy to install and set up.
Kompact EM PlumBack Valves – VR29
(0 reviews) Share it View Details
The Multiple Award-winning Kompact EM Series of Upgraded Blow-Off Valves are the world’s first plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses or extra assembly are required.
The Kompact EM Valve Series from Turbosmart takes the motorsport-proven billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug-and-play valve with full OE integration and control. There are no reference hoses, separate solenoids, or fiddly bits – Just bolt-on and plugin!
You can count on unmatched performance and reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (The more boost you have, the better it seals), Positive Seal O-Ring on the Piston’s face and Billet Construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment.
Vee Port Pro – Blue
(0 reviews) Share it View Details
The legend continues! Turbosmart’s VeePort Pro is an evolution of the original VeePort, now 20% smaller and 33% lighter. Based on Turbosmart’s BOV5 architecture, the VeePort Pro offers huge performance with a small footprint. Built on our Motorsport Proven Boost-Balance system using a 38mm piston, this valve can easily flow around 600HP when required and hold down as much boost as you can ever throw at it.
Universal Aluminum Intercooler Piping Kit
(0 reviews) Share it View Details
Due to lots of request, we have decided to bring back the universal aluminum piping kit. Click below for more info! Save $20-$30 when you buy the kit! You get 3x 90's, 1x 70, 1x 45, and 1x straight pipe. For silicone, you get 4x couplers, 1x 90 and 1x 45.
Treadstone Performance has introduced a new line up of quality universal aluminum bends. In the past we have come across many manufactures and shops across the internet selling low grade aluminum mandrel bends, that either you can not weld because of the poor quality ore used, have a clear coat on them which makes welding terrible, are easily scratched and dented because they are so soft, or are made from recycled aluminum cans that gives almost a purple hue. These bends are crappy and we feel you should get what you pay for!
60mm Flange Outlet
(0 reviews) Share it View Details
Genuine TiAL Sport replacement 60mm V60 weld on wastegate outlet flange. Made of stainless steel. This inlet flange is the one on the side of the gate.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product