GENV ELECTRONIC COMPGATE40 ELECTRONIC EXTERNAL WASTEGATE
Part # TS-0552-1502
Turbosmart’s Patent Pending, eWG40 is a fully electronic actuated wastegate – Built on the successful, class-leading GenV CompGate40 architecture, now with the kind of control never seen before. The eWG40 CompGate40 is a 40mm Electronic External Wastegate that uses full electronic control without the limitations associated with traditional pneumatic control.
Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The GenV CompGate40 already had class-leading flow capacity and heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can also be sure of unparalleled control.
There are no springs, no hoses, no boost reference signal, nor any associated limitations. Gone are ‘Minimum’ boost levels associated with base spring pressure or heat-related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or tuning interface. The eGate range requires a Dual Half-Bridge input for control, much like how an electronic throttle body is controlled and the strategy is as good as your imagination and your ECU or controller will allow.
Features
Class Leading, CFD & Bench Validated Flow Performance
Nitronic 60 Valve Guide & High Temp 347 SS Body
Liquid Cooled, Electronic Actuator
Strap Type V-band clamps
User Adjustable Actuator Position
Onboard Analog 0-5V Wastegate Position Sensor
Onboard Analog 0-5V Actuator Temperature Sensor
Onboard Digital (PWM) Wastegate Position Sensor
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0552-1502 | GenV eWG40 CompGate40 Electronic Black | $1011.59 |
MVS Wastegate Diaphragm
(0 reviews) Share it View Details
Genuine TiAL Sport replacement diaphragm for the MV-S 38mm Wastegates. Fits vband only.
Heat Screen™ - 36" x 20"
(0 reviews) Share it View Details
Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components.
Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape™ is ideal for sealing and covering seams.
Heat Screen™ - 12" x 24"
(0 reviews) Share it View Details
Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components.
Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape™ is ideal for sealing and covering seams.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product