BLOW OFF VALVE CONTROLLER KIT – KOMPACT SUPERSONIC (BLACK)
Part # TS-0304-1006
The Kompact Supersonic BOV Controller Kit is everything you need to get your diesel or low / no vacuum performance engine making all the right noises! This Universal kits includes the Turbosmart BOV Controller, and a Kompact Supersonic 28mm VTA (Vent to Atmosphere) Blow Off Valve.
The Turbosmart BOV Controller Kit is a kit comprising a controller, solenoid & all cables and hoses required for isntallation. The BOV Controller itself is an electrical device that takes input from your throttle pedal & uses this to energise a solenoid and vent your chosen valve. The Controller is adjustable for sensitivity and activation duration allowing you to customise it to your needs. The BOV Controller is designed to provide engines such as diesel and other ‘low/no’ vacuum signal engines where a dump or Diverter Valves is required.
The Kompact Supersonic Blow off valve is as 28mm BOV is a low impact, billet Alluminium Valve that can take any boost you can throw at it. Incorporating Turbosmarts’ Boost-Balance system and simple hose-end conenction, The Kompact Supersonic is a VTA (Vent to Atmosphere) valve for engine bay constraints and small capacity engines!
Turbosmart’s Boost-Balance System means the more boost you feed this valve, the better it closes and seals – It is literally as simple as that. Billet Alluminium construction with a diaphragm operated valve for the fastest possisble response with V-Band fitment and a range of springs to suit your needs.
Features
Adjsutable Sensitivity
Adjustable Duration
Billet 6000 Series Aluminium Construction
28mm Positive Seal Piston
Low Impact, Kompact Finnish
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| TS-0304-1006 | BOV controller kit (controller + custom Kompact Supersonic) BLACK | $453.59 |
GenV CompGate40 14psi External Wastegate (Blue)
(0 reviews) Share it View Details
The GenV WG40 CompGate40 External Wastegate is a Motorsport-proven, cost-effective external wastegate – The Highest Flowing Wastegate of its kind. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity.
The GenV Range has more features, options and performance than any other gate. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic, and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management.
A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360-degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Stainless-Steel Locking Ties - 8" + 14" Pack
(0 reviews) Share it View Details
Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas.
Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.
- Constructed from high grade 316 stainless steel
- Capable of withstanding in excess of 2500°F
- 100lbs tensile strength
- Eight 8" ties, fitting up to 2" O.D.
- Four 14" ties, fitting up to 4" O.D
Gen4 CompGate40 7psi External Wastegate (Black)
(0 reviews) Share it View Details
IT’S BACK. The Gen4 CompGate40 and HyperGate45 have been approved for continuation and re-introduction at an all-new price!
Still Australian-made!
Still a rock-solid performer!
Still, hand assembled and individually tested before shipping!
One change – A price drop!
Turbosmart is proud to announce the product continuation, re-introduction and price drop of their Gen4 CompGate40 and HyperGate45 external wastegates. This re-introduction with reduced pricing will help those of you who need a lower-spec solution but still want that Australian-made, hand-tested quality you get from a manufacturer with over 25 years of experience!
The Gen4 CompGate40 is a 4th Generation external wastegate packed with value, performance and reliability! If you need a 40mm external wastegate and don’t have motorsport in mind, this is the solution for you! Genuine street performer with good flow & heat characteristics, which is suitable for pump fuel and e85 applications.
GenV HyperGate45 14psi External Wastegate (Purple)
(0 reviews) Share it View Details
The GenV WG45 HyperGate45 External Wastegate is a Motorsport-proven, cost-effective 45mm external wastegate – The highest flowing gate of its kind. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity.
The GenV External Wastegate from Turbosmart was a ground-up rework of a classic, and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD is optimised and validated in-house for maximum flow and thermal management; the GenV Range has more features, options, and performance than any other gate.
A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360-degree optional routing of reference hoses, strap-type Vband clamps, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product