AEM 340LPH E85-COMPATIBLE HIGH FLOW IN-TANK FUEL PUMP (65MM WITH HOOKS, OFFSET INLET) 50-1215
Part # 50-1215
AEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances.
The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.
The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.
- Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
- Designed for high output naturally aspirated and forced induction EFI vehicles
- In tank design
- Each pump is tested to flow 340 lph @ 40 PSI
- Compact body (39mm diameter x 65mm length)
- Includes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended)
TECHNICAL SPECS:
Weight: 10.4oz (294grams)
Outside Diameter: 39mm OD
Length: 65mm
External Materials: Black plated steel with laser etching, green/gray end caps
Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline
Outlet Fitting: 8 mm hose clamp. Offset
PRV Activation: 80 PSI
Impeller Design: Single Scroll Ceramic Turbine
VOLTAGE SPECS:
Connector Terminal: 6 mm Spade (pos/neg)
Min Voltage Input: 6 volts
Max Voltage Input: 18 volts
Current Draw (40 psi): 12 amps (13.5v)
Current Draw (80 psi): 15 amps (13.5v)
Fuse: 20 amps (13.5v)
* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
| Item# | Description | Qty. | Price | |
|---|---|---|---|---|
| 50-1215 | AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump (65mm with hooks, Offset Inlet 50-1215 | $155.95 |
GenV RacePort BOV inc HE Position Sensor Cap (Black) with Female Flange
(0 reviews) Share it View Details
The GenV RacePort ‘Sensor Cap’ allows you to monitor the blow off valve (BOV) position for diagnostic or tuning purposes, a truly unique solution and the first of its kind on the market.
This valve suits Peer / Female Flange for fitment to non-turbosmart flanges and chargepipes.
If you are using BOV for traction/torque control, knowing how far it’s open is paramount to providing insight to optimise the calibration process further. Aside from a calibration benefit, check the logs if you doubt that the BOV is not staying closed when it should be. This has never been easier with the Turbosmart GenV Race Port ‘Sensor Cap’
Precision PTE 66MM WASTEGATE CO2 TOP (DUAL PORT TOP)
(0 reviews) Share it View Details
Precision Turbo and Engine's high-quality yet economical 66MM Wastegate CO2 Dual Port Top. The external wastegate was designed specifically for use with CO2-based boost control systems. The wastegate offers quicker response time, accuracy, and durability under the high pressure demands of CO2 actuation, when compared to standard wastegate designs.
TS-1 Performance Turbocharger 6870 T4 0.96AR Externally Wastegated
(0 reviews) Share it View Details
Smaller, Lighter and Faster – Turbosmart’s turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.
Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.
The TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.
All Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
Precision T25 T/HSG. INLET FLANGE GT28R GASKET
(0 reviews) Share it View Details
We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly seal your turbo system you can help prevent unnecessary surprises at the track.
There are no related products available.
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product