Borg Warner 7064 EFR Turbo 300-500 HP. Borg Warner 7064 EFR Turbo is an excellent turbocharger for drift, road racing and street driven applications. The 7064 delivers incredibly fast spool and response while working well on stock and heavily modified engines. The 70mm OD compressor has a 52.2mm inducer and at 56lb/min max flow - there is potential for 560hp - unheard of for this size compressor wheel. The low inertia 64mm Gamma-Ti turbine wheel is the optimal match for the 70mm FMW compressor wheel and is capable of 45+psi boost. This turbo uses the mid-size EFR ported-shroud compressor housing, great for fitment in cramped engine bays. Ideal for use in single turbo applications for the 350-560hp range, or as twin turbo applications 650-1000+hp. Ceramic Ball Bearing only, watercooling recommended (not mandatory)

Borg Warner's latest release, the EFR (Engineered for Racing) Series turbochargers. EFR is currently the most advanced turbo of its type engineered for the performance aftermarket. Crammed full of attributes that appeal to the performance car enthusiast, EFR is at the pinnacle of what can be done with the current state of the art.

The EFR line of turbos was born out of an internal BorgWarner Turbo Systems program labeled Advanced Aftermarket Products or AAP.

The program was engineered by a cross-functional team that began with the proverbial clean-sheet of paper. No legacy products, no preconceived notions of what a turbo could or could not have; no restrictions. The aerodynamics for the product line were selected using a range of optimized combinations that would give users turbo solutions anywhere between 250 and 1000 horsepower capability per turbo. Next, a list of every notable design characteristic for an engine boosting device was tabled. Specific interest was given to new ideas that had never been formed in metal or had never been combined into an aftermarket turbo.

The result is the new EFR (Engineered for Racing) line of turbos from BorgWarner. These turbos contain a bevy of key attributes such as Gamma Ti turbine wheels, dual ceramic ball bearing cartridges and investment cast stainless steel turbine housings. Collectively, those features help give the EFR line its innovative appeal and will provide a breakthrough experience in durability, device responsiveness and installer/user satisfaction.

Compressor Specifications

-Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
-Compressor Wheel OD (exducer): 70mm
-Compressor Wheel Inducer: 52.2mm
-Max Flow Rate: 56 lb/min
-Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
-Compressor Housing Connections:
Inlet: 3.5" Hose Coupler
Outlet: 2.0" Hose Coupler w/ integrated Vband option

Turbine Specifications

-Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
-Turbine Wheel OD: 64mm
-Stainless Steel Investment cast Housing
**The EFR 7064 is available in (3) different turbine housing configurations:
- 0.83 A/R T3 undivided (Internal WG)
- 0.92 A/R T4 twinscroll (Internal WG)
- 1.05 A/R T4 twinscroll (external WG)
-Turbine outlet: GT-Vband (aka small 3" vband) ~92mm OD for all EFR turbos


-Dual Row Ceramic Ball Bearings - lowest friction and fastest spool/response, most extreme durability, built-in oil control orifice - (aka oil restrictor) **no restrictor can be used with EFR turbos
-Watercooled Center Section - watercooling is recommended, 14mm banjo bolts
-Double seals on both turbine and compressor end for extreme durability and resistance to any oil seepage
-Boost Control Solenoid Valve Integrated to Compressor Housing
-Integrated Speed Sensor mounting provisions

Click Here For Borg Warners Technical Guide to the EFR Series Turbochargers!

Click Here For Borg Warner's Product Catalog

Click HereFor An Inside Look at the EFR Turbocharger

Borg Warner Turbo Sizing Map
The map below shows the inducer and exducer sizes in millimeters. Precision and Turbonetics follow a different terminology than Borg Warner. Borg Warner denotes the exducer of the compressor and inducer of the turbine, while Precision denotes the opposite. So to get a better understanding of similar turbos, we have highlighted the bold #'s for comparison to the Precision line up of turbochargers.

For instance, Precisions turbo 6262 would be closely related the Borg Warner 6264. Being that the Borg Warner's turbine wheels are made from Titanium and are half the weight of Turbonetics Precision and Garrets Inconel wheels, you can afford to have a bigger turbine wheel 64mm compared to 62mm because it will spool up quicker and be able to eat more exhaust gasses. Turbine wheels are the main factor in limiting HP, so with the same size compressor wheel, the Borg Warner units are able to support more HP than their competitors, while spooling even quicker!

Part # Description Color Size Price Qty.  
179355 7064 .83 T3 Single Scroll, Wastegate $2153.02/ea
179389 7064 .92 T4 Twin Scroll, Wastegate $2236.38/ea
179391 7064 1.05 T4 Twin Scroll, Non-Wastegate $2022.26/ea
Check us On Facebook Follow us On Twitter Watch us On You Tube