PRECISION UPGRADE GT-R TURBO
Part # G-GTRTURBO
These units have shown to make 850whp on roughly 26-29psi and Q16.� We believe that there is more left in the units but have not had them tested at a higher rate.�
Dyno Sheets/Testing: -93 Oct was @ 21psi -Q16 was @ 26-29psi (actuators did not have enough springs to keep shut)
Vehicle: -2012 GTR -Built Engine, 3.8L (stock displacement) with cams -Stock ECU with EcuTek -Forge Diaphragm-less Actuator -Jack Trans 800 package -M&H 275F, M&H 325R -Full weight vehicle, best of; 1.559 60’ 1/8th= [email protected] 1/4= [email protected]
Precision Turbo and Engine GTR Upgrade
Turbocharger: -Precision 51mm CEA compressor wheel (dual ceramic ball bearing CHRA) -Stock compressor cover -Stock Turbine housing -Stock spool characteristics These units have shown to make 850whp on roughly 26-29psi and Q16. We believe that there is more left in the units but have not had them tested at a higher rate. To order these units the process is relatively simple. We need for you to send us a good core (no broken studs or destroyed T/HSG or Compressor cover) and we exchange them for a set of finished units.Dyno Sheets/Testing: -93 Oct was @ 21psi -Q16 was @ 26-29psi (actuators did not have enough springs to keep shut)
Vehicle: -2012 GTR -Built Engine, 3.8L (stock displacement) with cams -Stock ECU with EcuTek -Forge Diaphragm-less Actuator -Jack Trans 800 package -M&H 275F, M&H 325R -Full weight vehicle, best of; 1.559 60’ 1/8th= [email protected] 1/4= [email protected]
Tell Us How You Feel!
join our email list
You’ll be first to know about Treadstone Performance Engineering new products, discounts and special events!
Be the first to add a review for this product
Review Product