Siemens Deka 44lb/h with EV6 / USCAR Connector

Genuine Siemens DEKA High Impedance Injectors

These injectors flow 44.5 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$49.99

Siemens Deka 53lb/h with EV6 / USCAR Connector

Genuine Siemens DEKA High Impedance Injectors

These injectors flow 53.5 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications!

$49.99

Siemens Deka 60lb/h 4 Mototron High Impedance (Long Style) EV1

Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors

These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$54.95

Siemens Deka 60lb/h 4 Mototron High Impedance USCAR EV6

Genuine Siemens / Mototron DEKA IV High Impedance Injectors (Long Style) with USCAR EV6 Connector

These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$54.95

Siemens Deka 60lb/h 4 Mototron High Impedance (Short Style)

Genuine Siemens / Mototron DEKA IV High Impedance Injectors

Ultra-Compact, high flow injector at just 48mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$54.99

Siemens Deka 80lb/h 4 Mototron High Impedance EV1

Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance(Long Style)Injectors

These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$59.95

Siemens Deka 80lb/h 4 Mototron High Impedance USCAR EV6

Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors

These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$59.95

Siemens Deka 630cc Injector 107961 60lb

Siemens 60 lb/hr Injector 107961. This Siemens 625-635cc injector set has been custom machined for all Import applications, Supra, Mitsu Evo, Subaru, Scion...etc.

$239.95

Displaying 1 thru 8 of 8 Products.
Check us On Facebook Follow us On Twitter Watch us On You Tube