DEI Aluminized Plug Wire Sheath

Made from a hi-temp glass fiber fabric bonded to reflective aluminized material, Aluminized Plug Wire Sheaths were designed as an inexpensive alternative for protecting specific spots on ignition wires and boots from heat sources.

$9.50

DEI Cool-Tape

Cool-Tape offers a flexible, easy to apply and ultra light weight solution to reflect heat and ideal for wrapping wiring, cables, hoses, fuel lines and covering seams. Made of one mil aluminized material bonded to woven fiberglass, Cool-Tape has a super strong self-adhesive backing capable of protecting up to 2000F radiant heat and available in two different widths and three different lengths.

$15.41

DEI Cool-Tube

Cool-Tube is designed to protect wires, cables, fuel, brake lines and more from damaging heat sources. Manufactured from convoluted nylon 6 tubing and covered with an aluminized fiberglass fabric, Cool-Tube combines flexibility with maximum thermal protection and resists abrasions, chemicals, oil, condensation and other contaminates.

$17.49

DEI Hi-Temp Shrink Tubes

Professional grade flexible flame retardant polyolefin tubing provides excellent insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Over expanded tubing shrinks down to 33% of it�s original diameter to fit snugly over wires and connectors for a water-tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections and terminals and meets the material functional properties of Military Spec DTL-23053/5C.

$10.31

DEI Reflect-A-Cool

Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses.

$9.60

1" x 50ft DEI Titanium Exhaust Heat Wrap

Titanium exhaust Heat wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability � and with a cool carbon fi ber look! * Withstands 1800˚F direct/2500˚F radiant heat * Promotes increased flow for improved performance * High resistance to chemical & oil spills and abrasions * Reduces temperature & vibration breakdown * Extremely pliable for easy install � will not shrink * No need to "wet" wrap to install NOTE: Design Engineering HT Silicone Coating spray is NOT recommended for DEI Titanium wrap.

$34.20

DEI Cool-Tube Extreme

Cool-Tube Extreme is wire re-enforced and constructed of a special composite material with a stylish aluminized mylar outer covering.

$14.42

DEI Floor & Tunnel Shield - Heat & Sound Insulation

Floor and Tunnel Shield was designed to withstand direct temperatures up to 1750F. Because of its unique material, it is capable of insulating against unwanted road noise up to 50%.

$36.50

DEI Cell Saver Battery Insulation Kit

Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes.

$21.58

2" x 15ft DEI Titanium Exhaust Heat Wrap

Titanium exhaust Heat wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability � and with a cool carbon fi ber look! * Withstands 1800˚F direct/2500˚F radiant heat * Promotes increased flow for improved performance * High resistance to chemical & oil spills and abrasions * Reduces temperature & vibration breakdown * Extremely pliable for easy install � will not shrink * No need to "wet" wrap to install NOTE: Design Engineering HT Silicone Coating spray is NOT recommended for DEI Titanium wrap.

$18.60

DEI Cool Cover - Air Tube Cover Kit

Cool Cover is designed to prevent air tubes from becoming heat sinks. Made of heat treated fiberglass with a reflective coating, Cool Cover will reflect radiant heat from air tubes and promotes a cooler, denser, more powerful air charge.

$63.97

DEI Fire Sleeve & Tape Kits

Ideal for protecting against intense underhood heat making it the perfect solution for insulating hoses, wiring, oil and fuel lines and more.

$18.28

DEI Heat Resistant Sealant

Developed by Dow Corning for the extreme-duty aerospace applications Heat Resistant Sealant bonds to almost all surfaces including fiberglass, metal, wood, rubber and plastic. Its an excellent way to seal and encapsulate in areas of high temperatures and perfect for sealing cracks in metal.

$15.83

DEI Protect-A-Boot and Wire Kits

Everything you need to protect your spark plug boots and wires is available in one convenient kit. Each Protect-A-Boot & Wire Kit contains all the benefits and features of DEIs Protect-A-Wire spark plug wire sleeving packaged with color matched DEI Protect-A-Boots and Hi-Temp Shrink Tubes. This complete kit will optimize underhood protection against radiant heat while adding a professional finished look.

$28.10

2" x 25ft DEI Titanium Exhaust Heat Wrap

Titanium exhaustHeat wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability � and with a cool carbon fi ber look! * Withstands 1800˚F direct/2500˚F radiant heat * Promotes increased flow for improved performance * High resistance to chemical & oil spills and abrasions * Reduces temperature & vibration breakdown * Extremely pliable for easy install � will not shrink * No need to "wet" wrap to install NOTE: Design Engineering HT Silicone Coating spray is NOT recommended for DEI Titanium wrap.

$26.99

DEI Fire Tape / Self Vulcanizing

Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing and forms a permanent water-tight barrier. Each roll is 1 wide x 36 length and includes a guide line for easy application.

$37.66

DEI Heat Screen

Heat Screen offers an excellent way to reflect radiant heat away from a vehicles interior and because of its flexibility, can be trimmed-to-size to protect against excessive heat sources.

$74.47

DEI Protect-A-Boots

Protect-A-Boots provide the ultimate protection for spark plug boots and wires from extreme temperatures generated by vehicle exhaust headers and manifolds. Made from a high temperature resistant fi berglass composite material and double wall construction. Protect-A-Boots prevent burning, hardening and cracking that could lead to engine misfire and damage. If ignition wires are touching or close to exhaust headers we recommend the added protection of wrapping the headers with DEI exhaust wrap in the problem area(s) in addition to installing Protect-A-Boots.

$15.60

DEI T25 / T28 Titanium Turbo Heat Shield

DEI T25 / T28 Titanium Turbo Shield with LR Technology (Shield only). Design Engineering's new custom-fit T25 / T28 Titanium Turbo Shield with LR Technology provides the ultimate means of reducing turbo lag while serving as a superior heat barrier,shielding and protecting engine components, hoods and painted surfaces. Built for extreme performance!

$270.10

2" x 50ft DEI Titanium Exhaust Heat Wrap

Titanium exhaust Heat wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability � and with a cool carbon fi ber look! * Withstands 1800˚F direct/2500˚F radiant heat * Promotes increased flow for improved performance * High resistance to chemical & oil spills and abrasions * Reduces temperature & vibration breakdown * Extremely pliable for easy install � will not shrink * No need to "wet" wrap to install NOTE: Design Engineering HT Silicone Coating spray is NOT recommended for DEI Titanium wrap.

$53.82

Displaying 1 thru 20 of 40 Products. Next >>
Check us On Facebook Follow us On Twitter Watch us On You Tube