Bosch Water to Air Intercooler Pump

This is a new Bosch water pump specifically designed for circulating water in water-to-air intercoolers. Unlike other bilge pump-based solutions available, this pump is designed by Bosch and Ford specifically for water/air applications.

$149.99

Magnetti Marelli 46lb/hr 491cc/min Short Racing Injectors

The characteristics of the injector are a fast pulse response, high precision, high dynamic range and optimum fuel atomisation. These are achieved by a high performance ON-OFF actuating electromagnet with opposing expansion poles that moves an internal injector valve on high-precision ground cylindrical slides, and a high precision nozzle.

$59.99

Bosch 24lb/hour Fuel Injector w/ EV1 Connector

Genuine Bosch 24lb/hour Fuel Injectors

These injectors flow 24 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$49.99

Bosch Inline Fuel Pump 044 0580254044

Bosch Inline Fule Pump 0580254044. Bosch In-Line 044 fuel pumps are designed to be mounted outside of your gas tank, most commonly rear and center under your car.

$189.95

Bosch 30lb/hour Fuel Injector with EV1 Connector

Genuine Bosch 30lb/hour Fuel Injectors

These injectors flow 30 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$59.99

Bosch 34lb/hour Injector with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 34 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$54.99

Bosch 36lb/hour Fuel Injector with EV1 Connector

Genuine Bosch 36lb/hour Fuel Injectors

These injectors flow 36 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$54.99

Bosch 39lb/hour Fuel Injector with EV6 Connector

Genuine Bosch 39lb/hour Fuel Injectors

These injectors flow 39 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$69.99

Bosch 39lb/hour LS3/LS7/L76/L92/L99 with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 39 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability.

$59.99

Bosch 42lb/hour Green Giant Fuel Injectors with EV1 Connector

Genuine Bosch Green Giant 42lb/hour Fuel Injectors

These superb Bosch injectors gained notoriety for their excellent flow and response characteristics in modern Volvo turbo applications. The characteristics necessary to meet stringent European emissions laws while supplying a wide dynamic flow range produces and excellent, balanced injector.

$57.99

Bosch 50lb/h LS3/LS7/L76/L92/L99 with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 50 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability.

$79.99

Bosch 550cc 52lb/hour with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors - Direct fit for GT500

These are the most popular injectors for multiple applications and can be flowed all the way up to 1000cc. Used by many of the top names in the injector business. These injectors flow 52 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications!

$59.95

Bosch ZR1 52lb/hour with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors - Direct fit for LS9

These injectors flow 52 lbs/hr at 58 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability.

$56.99

Bosch 65lb/hour 650cc Low Impedance Fuel Injector

Genuine Bosch 65 lb/hour Low Impedance Injectors

These injectors flow 650 cc/min at 43.5 PSI ( 3 BAR ). Some websites may refer to their flow rating as 65 lb/hr or 650/680 cc/min Bosch Peak and Hold or Low-Z Injectors. These high flow injectors offer an excellent spray cone and very good response but should not be pushed to very high static rail pressures.

$69.99

Bosch 65lb/hour LS3/LS7/L76/L92/L99 with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 65 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability.

$79.99

Bosch 65lb/hour 650cc with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 65 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$69.99

Bosch 72lb/hour 750cc with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 72 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications!

$78.00

Bosch 85lb/hour LS3/LS7/L76/L92/L99 with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 85 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability.

$84.99

Bosch 95lb/hour 1000cc injector with EV6 / USCAR Connector

Genuine Bosch High Impedance Injectors

These injectors flow 95 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

$89.95

Bosch EV14 1150cc 105lb High Impedence

Bosch EV14 1150cc 105lb High Impedance.Genuine Bosch High Impedance Injectors - These are direct from the manufacture 1150cc size, not modified, and flow match like the popular 550cc to 750 and 1000cc rates. This is right out of the box at 1150cc so you dont have to worry about the injecting being taken apart opened up and being tampered with. These injectors flow 105 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications!

$99.95

Displaying 1 thru 20 of 22 Products. Next >>
Check us On Facebook Follow us On Twitter Watch us On You Tube